The ULTRA Gen2 series represents a revolutionary improvement in titanium precision rifle suppressors. We took everything we've learned over the last decade building the best precision rifle suppressors in the world and put it into the ULTRA design. The ULTRA series offers unprecedented light weight and class-leading suppression levels. Compared to the original ULTRA series, the ULTRA Gen2 is on average 2 dB quieter and about 20% lighter. Strength and caliber ratings are the same.
With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the ULTRA suppressors use a heat-treated 17-4 thread insert and initial blast shield. The ULTRA series suppressors also have the flexibility to be changed from direct thread to CB mount and vice versa via a simple factory service operation, in case your needs change. This is accomplished by removing or replacing the default brake from the direct thread version. Like the original, the Gen2 ULTRA is all-titanium and is fully welded. The Gen2 is now a "tubeless" design, with the baffles joined directly with no separate tube. This material and construction provide a great strength to weight ratio. It can take whatever your precision rifle can dish out.
The .30 cal ULTRA was designed around .308 for maximum flexibility and is rated up to .300 Winchester Magnum (18" barrel), but it's the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua, 6.5-284 Norma, and 7mm Remington Magnum & WSM.
Specifications
- Caliber: .30
- Material: Titanium
- Length: 9"
- Diameter: 1.5"
- Weight: 10.0 ounces (CB mount) / 11.8 ounces (Direct Thread)
- Mount: CB Muzzle Brake or Direct Thread
- Brake Material: Heat-treated 17-4 stainless
- Brake Finish: Ionbond DLC
- Finish: Black Cerakote
- Use: Precision/Long-range rifle, bolt or semi-auto
Special Features
- Direct thread attachment option
- CB series muzzle brake and flash hider attachment option
- Ionbond DLC coating on CB muzzle devices
- Conical shoulder surface on CB mount
- 100% titanium construction
- "Tubeless" construction
- 360-degree fully-welded baffle stack
- Magnum rated
- Rock-Solid POI Repeatability
- TBAC Lifetime Warranty
Minimum Barrel Lengths
- 6" - .300 Blackout (subsonic)
- 8" - .300 Blackout (full power)
- 10" - 6.8 SPC, 7.62x39
- 11.5" - 223 Rem, 5.56, 6.5 Grendel
- 14.5" - .308 Win
- 16" - .260 REM, 6.5 Creedmoor, .243 WIN
- 18" - 7mm RM, 7mm WSM, .300 WIN MAG, .300 WSM, .22 Creedmoor, 6.5 PRC, 6.5 SAUM, 7 SAUM
- 20" - 7mm RUM, .300 RUM, .300 PRC
- 22" - .300 Norma Magnum, 28 Nosler, 7 STW
- 23" - 26 Nosler, 6.5-300 Weatherby
Once your suppressor purchase is finalized with Mile High Shooting, a Form 3 will be filed with the ATF requesting approval to transfer your suppressor to your chosen FFL. Initial processing can take 3-7 business days. Customers may help expedite this time frame by requesting the chosen FFL to send a copy of their FFL & SOT to ffl@milehighshooting.com. Please note, initial processing time may be delayed further if your chosen FFL fails to provide required documentation in a timely manner. Once submitted, it takes 7-21 days for Mile High Shooting to receive the Form 3 approval. As soon as the approval is received, your suppressor and any accessories will be shipped to your chosen FFL within 24-48 business hours by 2 Day Air. Your chosen FFL will then contact you once it is received and you may complete your Form 4 processing at their facility.
___LEGAL INFO______
Mile High Shooting Accessories (MHSA) will only ship suppressors to Class III FFL holders. BATF regulation information for Suppressor ownership are as follows:
Be at least 21 years of age.
Be a U.S. citizen.
Have no felony convictions or domestic violence convictions.
Have no dishonorable discharge.
Not deemed mentally unstable by a competent authority.
The NFA rules/laws are posted through the BATF website. At this time, the following states DO NOT ALLOW private ownership of suppressors: CA, MA, DE, HI, NJ, NY, RI, IL, District of Columbia. CA allows class 3 dealers and class two manufacturers to possess suppressors.
U.S. Government Export Restriction This item is restricted for export by the State Department and Department of Commerce. Make sure that you are familiar with all applicable laws. ITAR Information. |
FFL Requirements & Magazine Restrictions This item has to ship to an FFL. Please read the attached information. Shipping Rules & Magazine Restrictions.
|
- PaypalRestrict:
- PaypalRestrict
- FFL:
- Yes